Transport and installation
23
Assembly Instructions
Linear Axes HM-S and HT-S
HMS_HTS-01-0-EN-1905-MA
5.4 Storage
Store the linear axes in their transport packaging.
Alternatively: Use packaging that secures the linear axes against slipping, damage, and vibrations.
Store the linear axes in dry, frost free rooms only.
Clean and protect used linear axes before storage.
Remove packaging.
To transport the linear axis, hoist it at the points designated A and B (see Fig. 5.1, Fig. 5.2 and Fig. 5.3). The points A and
B should be a quarter of the axis’ overall length from each of its ends.
Do not hoist the linear axis by its attachments. During transport, provide additional support for heavy attachments such
as the drive.
Dispose of packaging in an environmentally friendly way.
The linear axes HM-S and HT-S may only be installed and operated indoors.
NOTE
5.5 Unpacking and installing
5.5.1 Unpacking and installing the linear axes HM-S/HT-S
Warning! Health and environmental hazards!
Contact with lubricants may cause irritation, poisoning, allergic reactions, and damage to the environment.
Use only suitable, non-hazardous agents. Note the manufacturer’s safety data sheets!
Ensure proper disposal!
ATTENTION!
Fig. 5.1
Supporting points A and B for hoisting and transporting, here on an HM-S linear axis
Supporting point A
Supporting point B
Summary of Contents for HM-S
Page 99: ......
