36
Assembly and connection
Assembly Instructions
Linear Axes HM-S and HT-S
HMS_HTS-01-0-EN-1905-MA
Fig. 6.24
Mounting the limit switch: HM040S, HT100S
6.4 Mounting the damping element
The damping element actuates the limit switches at the carriage’s two end positions (at stroke 0 and stroke max) and must
be mounted on the same side as the limit switches.
Place the damping element at the carriage.
Using the enclosed M3 bolts, secure the damping element loosely on the carriage.
Align the damping element parallel to the carriage’s lower edge.
The damping element has now been pre-installed.
Fig. 6.25
Mounting the limit switch: HM060S, HM080S, HM120S, HT150S, HT200S, HT250S
Fig. 6.26
Mounting the damping element
Summary of Contents for HM-S
Page 99: ......
