Trouble Shooting
46
HT800 Series VTR and Disk controller
The Mark Out function does not increment the cue number, is
this normal?
Yes. The cue point number is only incremented
automatically when pressing the Mark IN button.
The display does not indicate Crash Record mode, is this
normal?
Yes. Only Insert, Assemble and Inhibit modes are
indicated. The controller is in Crash Record mode when the
edit mode area of the display is blank.
Where is the tape eject button?
This is the first command available from the Menu.
Refer to Chapter 4, Using the Menu System for further
details.
There is no communications to or from the VTR?
Check that the cable adaptors have been made correctly.
