Operation
2012 Hi Tech Systems Limited
19
button changes the display to show the timecode
setting (it is set in the menu for the cue controller).
Using CUEs
CUE locations are timecode reference points that
have been stored in one or more of the controller’s
249 cue memory locations. Once a cue is stored a
device can be made to search very quickly to a
selected CUE point.
Note:
Cue Functions are available on all the channels in
Crash record mode or channel 1 in the editing modes.
Each cue location is stored as an In point and / or
Out point. VTRs may be cued to any location. Cues
are stored and recalled using the MARK IN/MARK OUT
Keys, SHIFT and CUE, +/- keys.
For successful VTR cue operations the following
conditions must be met:
Continuous time code or tape timer information
from tape.
T/C key must be set for the same time code as
on the VTR.
Entering cues MARK IN/OUT Keys
A CUE IN point can be entered ‘on the fly’ whilst the
tape is moving by pressing the MARK IN key, and a
CUE OUT point can be similarly entered by pressing
the MARK OUT key. These actions are confirmed by
the LED’s under the corresponding button.
