Operation
32
HT800 Series VTR and Disk controller
T-Bar shuttle key
Press this key to turn the T-Bar into a shuttle control
and set the VTR into shuttle. The shuttle range is:
+/- 0, 0.05, 0.1, 0.2, 0.4, 1.0, 2.0, 4.0 with a ‘dead’
position in the centre of the T-Bar. This is useful for
locating the exact start of the playback without
having to use the jog/shuttle wheel.
Pre-set variable key
Press this key to select variable playback mode,
controlled from the T-Bar, but using the variable
range as set up in the menu (see Chapter 4).
The speed ranges available are:
Min (%)
Slow (%)
Norm
Fast (%)
Max (%)
0 to 25
0 to 33
0 to 50
0 to 100
-100 to 200
DDR mode (simultaneous play/record)
Select disk mode
This mode of operation will be the most used and is
ideal for instant slow motion replays. Select Disk On
from the menu. In this mode the DDR recorder and
player are controlled together. The record ports are
ganged together (un-gang a channel by pressing
SHIFT + that record channel, or change the menu
setting to auto group off) and the playback channels
are ganged together (un-gang a channel by pressing
SHIFT + that playback channel).
