Operation
2012 Hi Tech Systems Limited
25
Edit modes also require the following switches to be
set:
Set the TC on the controller to read the same
time code as on the VTR, e.g. AUTO
Set the TC generator on the record VTR for
REGEN (not PRESET) and INT (not EXT)
Note:
The PLAYER cannot be put into record accidentally.
Edit delay
Corrects the delay time from sending the RECORD
command to the VTR until recording starts.
If the recording starts late increase the delay. If the
recording starts early decrease the delay, (pre-set to
5 frames - see Chapter 4 to adjust). The edit delay is
global for all VTRs.
Start delay
Corrects any delay in the Player VTR going into
playback, (pre-set to 0 frames - see Chapter 4 to
adjust).
Marking in and out points
To start editing, it is required to set three edit points
out of four points. The remaining edit point is
automatically determined when the other three points
have been set. Select the PLAYER by pressing the
VTR selection key.
