Using the Menu system
2012 Hi Tech Systems Limited
39
and end of the recording will have picture
disturbance.
Crash record is usually used to make the
first recording on a blank tape.
Assemble
Starts to record in assemble edit mode.
New video, audio tracks, linear timecode
and control track are recorded and joined
to any previous material.
Since, assemble recording mode destroys
any CTL information that might already
be on the tape at the end of the
recording, playback at the end of the
recording will have picture disturbance.
Insert
Starts to record in the Insert edit mode.
Insert allows you to define which video
and audio tracks are selected using the
jog/shuttle key and the wheel. Existing
control track and linear timecode are
preserved and playback discontinuities at
the start and end of the recording are
minimised.
The tracks are displayed as follows:
V 1 2 T 4 1 2 3 4 5 6 7 8
* * * * * * * * * * * *
The * indicates that the track is enabled.
The first 4 tracks labelled 1,2,T and 4 are
audio analogue tracks and the second set
of tracks 1 - 8 are digital audio tracks.
The Record start and end points are
made with clean edit points, therefore
enabling replay at the start and end of
the recording.
Rec only edit
NO or YES
NO
DEF
Description: If editing is to be done using only a
record VTR (channels REM 2 and above)
