Hitachi VSP F1500 User Manual Download Page 290

Page: 290 / 326

Item

Description

You can also click to configure a pair you have
selected in the Available LDEVs table and a pair
you have selected in the Selected Pairs table.

Clear button

Click to move the selected S-VOL from the
Selected Pairs table back to the Available LDEVs
table.

Available LDEVs table

The following table lists the items in this table on the Assign Secondary
Volumes window.

Item

Description

LDEV ID

The LDEV identification number, which you can specify
as the S-VOL.

LDEV Name

The LDEV's name.

Port ID

The port name of the LDEV's LUN path.

This item is displayed if you select LUN for Select By.

Host Group Name / iSCSI Target Alias

The host group name and ID or iSCSI target alias and
ID of the LDEV's LUN path.

This item is displayed if you select LUN for Select By.

iSCSI Target Name

The iSCSI target name.

This item is displayed if you select LUN for Select By.

LUN ID

The LUN identification number of the LDEV's LUN path.

This item is displayed if you select LUN for Select By.

Capacity

The LDEV's capacity.

CLPR

The LDEV's CLPR ID.

Capacity Saving

Information about the LDEV's capacity saving function.
•

Compression:

The compression function is used.

•

Deduplication and Compression:

The

deduplication function and the compression function
are used.

•

Disabled:

The capacity saving function is not used.

T10 PI

The LDEV's T10 PI attribute information.
•

Enabled:

The LDEV's T10 PI attribute is enabled.

•

Disabled:

The LDEV's T10 PI attribute is disabled.

Snapshot Group

The snapshot group name.

Information is displayed for this item only if you have
configured a snapshot group for the HTI pair.

Status

The pair status.

For more information about pair status, see

Thin Image

pair status definitions on page 160

290

Thin Image GUI windows and wizards

Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series

Summary of Contents for VSP F1500







































































































































































































































































































































Search results

Summary of Contents for VSP F1500

Reviews:

Brands by name

Popular brands

Hitachi VSP F1500, User Manual

Search results

Summary of Contents for VSP F1500

Reviews:

Brands by name

Popular brands