6. In Email Settings, enter the destination email address and the attribute (To, Cc,
Bcc).
■
To add an email address, click Add and then specify the email address and
attribute in the Add Address window.
■
To change an email address and the attribute, select the check box for the email
address you want to change, and then click Change. You can change the email
address and attribute in the Change Settings window.
You can select multiple email addresses. If you select multiple email addresses,
you can change their attributes only.
■
To delete email addresses, select the check boxes for the email addresses you
want to delete, and then click Delete.
Make sure that you specify these settings if Mail Notice is set to Enable.
7. Enter the source email address (required) and the return email address (option).
You can enter up to 255 alphanumeric characters and allowed symbols (!, #, $, %, &,
`, +, -, *, /, ', ^, {, }, _, and .).
8. Enter the information of the email server.
■
Identifier
To specify the host name, select Identifier and then enter up to 63
alphanumeric characters and allowed symbols (!, #, $, `, +, -, *, ', {, }, _, and .).
■
IPv4
To specify an IPv4 address, select IPv4 and then enter four numbers (0 to 255) in
the following format:
XXX.XXX.XXX.XXX (Each XXX indicates a number.)
■
IPv6
To specify an IPv6 address, select IPv6 and then enter eight hexadecimal
numbers (0 to FFFF) in the following format:
YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY:YYYY (Each YYYY indicates a hexadecimal
number.)
You can also specify the abbreviated format of IPv6 addresses.
Make sure that you specify these settings if Mail Notice is set to Enable.
9. In SMTP Authentication, select Enable (to use SMTP authentication) or Disable (to
not to use SMTP authentication). If you select Enable, also enter the account name
and password that you use for SMTP authentication.
You can enter up to 255 alphanumeric characters and allowed symbols (!, #, $, `, +,
-, *, ', {, }, _, and .).
Make sure that you specify these settings if Mail Notice is set to Enable.
10. Click Send Test Email, if necessary, to test the settings.
Editing alert notification email settings
Chapter 2: Setting alert notification email
Hitachi Alert Notification Guide for VSP5000 Series
20
