E-14
1
4
2
3
1
4
2 3
Pressing the "1-2 person" button
for approximately three seconds
while the current time is flashing
will cause the clock to display
"12:00" (12:00 noon) and the clock
returns to the initial value.
To check the current time
during Cooking, Keep Warm,
Timer Cooking, or Reheating:
The current time is displayed for
three seconds when or
is pressed, and then the clock
returns to the original display.
●
The time adjustment will be
automatically completed after
approximately one minute
unless you press the
"Cancel/off" button.
●
The clock displays time in a
24-hour format, in which 12
a.m. is 0:00, 12 p.m. is 12:00,
and so on.
Setting the Current Time
Example: To change "7:00" to "20:30" *The indication of the type of rice and program is provided as an example.
●
The selected cooking program
and the current time are
displayed.
●
When the appliance is unplugged, the display will be disabled, however, the clock operates on a built-in battery.
●
You can configure the display to show the current time on the LCD display even when the power plug is disconnected.
●
The clock may lose time by approximately two minutes per month, depending on the room temperature. If this is
the case, use the following steps to set the clock to the current time.
Insert the power plug into a
power outlet
●
The time cannot be adjusted
during Cooking, Keep Warm,
Timer Cooking, or Reheating.
Press or for
approximately one second to
flash the time display.
Press or to set the time to "20:30"
●
The time changes each time you press or .
· The clock goes back in one-minute increments
each time is pressed. It moves forward in
one-minute increments each time is pressed.
· Continuously pressing either of these buttons turns the
clock forward or backward in 10-minute increments.
Press to finish setting the
time.
●
The time display changes from blinking to
always on.
Hour
Minute
Lights up
A beep is emitted and
the display flashes
