Hitachi P50XR01E User Manual Download

Page: 100 / 123

ENGLISH

Symptoms

Check list

Page

Cannot delete all the programmes

Some programmes may be protected by Delete Lock.

The recorded programme disappears
or nothing is recorded

• Whilst Recording Timer is in operation, reception conditions

deteriorated, or broadcast suspended.

• Power turned Off during recording or playback due to the power

outage or unplugged. Lost programmes cannot be compensated.

All the recorded programmes
disappear

• Power is turned Off during recording or playback due to the power

outage or unplugged. Lost programmes cannot be compensated.

The rear of the unit makes a buzzing
sound.

This could be the sound produced by the motor fan or HDD when it
is in operation. This is not a malfunction.

Cooling fan sounds in standby mode

If Recording Timer is On, the motor fan may be turning even in
standby mode. This is not a malfunction.

Slow display action

Display action may become slow during recording or some
operation. This is not a malfunction.

TROUBLESHOOTING (continued)

Symptom and Check List for HDD functions (continued)

Summary of Contents for P50XR01E




























































































































Search results

Summary of Contents for P50XR01E

Reviews:

Related manuals for P50XR01E

Brands by name

Popular brands

Hitachi P50XR01E, User Manual

Search results

Summary of Contents for P50XR01E

Reviews:

Related manuals for P50XR01E

Brands by name

Popular brands