manualshive.com logo in svg

Hitachi F1500, Hardware Manual

Share
Download
Hitachi F1500 Hardware Manual Download Page 195

controller box

The enclosure that contains the storage system controller. For some
models, disk drives may be included as well. Controller boxes come in 2U
and 3U versions.
•

CBL: 

AC-powered 3U controller box.

•

CBLE: 

AC-powered 2U controller box with support for encryption.

•

CBLD: 

DC-powered 3U controller box.

•

CBLE: 

3U controller box that supports encryption.

•

CBSL controller box: 

A 3U controller box that can contain a

maximum of 12 3.5-inch drives.

•

CBSS controller box: 

A 2U controller box that can contain a

maximum of 24 2.5-inch drives.

•

CBXSL controller box: 

A 3U controller box that can contain a

maximum of 12 3.5-inch drives.

•

CBXSS controller box: 

A 2U controller box that can contain a

maximum of 24 2.-5 inch drives.

CRC

See cyclic redundancy check.

cyclic redundancy check (CRC)

An error-correcting code designed to detect accidental changes to raw
computer data.

D

differential management-logical unit

disaster recovery

A set of procedures to recover critical application data and processing
after a disaster or other failure. Disaster recovery processes include
fallover and fallback procedures.

DMLU

See differential management-logical unit.

drive box

Chassis for mounting drives that connect to the controller box.
• Drive boxes with AC power supply:

○

DBS, DBL, DBF: 

Drive box (2U)

○

DBX: 

Drive box (4U)

○

DBW: 

Drive box (5U)

Glossary

195

Hitachi Virtual Storage Platform G1000, G1500, and Virtual Storage Platform F1500 Hardware Guide

Summary of Contents for F1500

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands