manualshive.com logo in svg

Hitachi F1500, Hardware Manual

Share
Download
Hitachi F1500 Hardware Manual Download Page 146

Mode

Category

Description

Default

MCU/RCU

The restore operation (Reverse Copy, Quick Restore) is not
allowed on the secondary volume where S-VOL Disable is
set.

506

Universal
Replicator,
Universal
Replicator for
Mainframe

This option is used to enable Delta Resync with no host
update I/O by copying only differential JNL instead of
copying all data.

The HUR Differential Resync configuration is required.

Mode 506 = ON:

Without update I/O: Delta Resync is enabled.

With update I/O: Delta Resync is enabled.

Mode 506 = OFF (default):

Without update I/O: Total data copy of Delta Resync is
performed.

With update I/O: Delta Resync is enabled.

Note:

Even when mode 506 is set to ON, the Delta Resync may
fail and only the total data copy of the Delta Resync
function is allowed if the necessary journal data does not
exist on the primary subsystem used for the Delta Resync
operation.

OFF

MCU/RCU

530

Universal
Replicator for
Mainframe

When a Universal Replicator for Mainframe pair is in the
Duplex state, this option switches the display of
Consistency Time (C/T) between the values at JNL restore
completion and at JNL copy completion.

Mode 530 = ON:

- C/T displays the value of when JNL copy is completed.

Mode 530 = OFF (default):

C/T displays the value of when JNL restore is completed.

Note:

At the time of Purge suspend or RCU failure suspend, the
C/T of Universal Replicator for Mainframe displayed by
Business Continuity Manager or Storage Navigator may
show earlier time than the time showed when the pair was
in the Duplex state.

OFF

RCU

531

Open and
Mainframe

When PIN data is generated, the SIM currently stored in
SVP is reported to the host.

Mode 531 = ON:

The SIM for PIN data generation is stored in SVP and
reported to the host.

Mode 531 = OFF:

The SIM for PIN data generation is stored in SVP only, not
reported to the host, the same as the current specification.

OFF

MCU/RCU

146

System option modes

Hitachi Virtual Storage Platform G1000, G1500, and Virtual Storage Platform F1500 Hardware Guide

Summary of Contents for F1500

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands