4 - 14
Troubleshooting > Display of Error Codes and Troubleshooting
*1:
"Formatting DVD-RW/+RW on the DVD video camera/recorder" is exclusively for camera recording:
It is necessary to write images recorded on the DVD video camera/recorder in real time (in order to
enhance the responsiveness of DVD-RW/+RW).
With DVD-RW, the recording mode (VR or VF mode) must be set during initialization.
*2: This means an error in 7700s: Numerals will appear in digits xx for actual error codes.
Error code
Contents of problem
Troubleshooting
5122
Video or photo fi le cannot be opened.
Clean the disc and optical pickup, referring to “4-3-5
Cleaning disc and optical pickup”.
Replace the disc.
Replace the disc drive unit.
7601
Optical pickup was faulty.
Replace the disc drive unit.
77xx
(*2)
Formatting disc failed.
Clean the disc and optical pickup, referring to “4-3-5
Cleaning disc and optical pickup”.
Replace the disc.
Replace the disc drive unit.
7902
Disc insertion block does not open.
Make sure your hand is not blocking the disc insertion
block.
Remove the disc, referring to "4-6 Procedure for
Removing Disc from Faulty DVD Video Camera/
Recorder", and then refer to "4-5 Trouble Diagnosis".
A080
Reading signal from disc failed due to
condensation or dirt on disc.
With the disc left loaded, set the power switch to “OFF”,
and then leave the DVD video camera/recorder in a dry
place until condensation disappears (for at least 1-2
hours).
Clean the optical pickup, referring to “4-3-5 Cleaning
disc and optical pickup”.
EC87
Emergency stop occurred while data
was being read or written from/to disc.
Refer to “4-3-4 Disc load check fl owchart”
F100
Buffer overfl owed during recording
due to foreign object in the vicinity of
optical pickup, or optical pickup was
faulty.
Remove the foreign object, taking care that the optical
pickup is not damaged.
Replace the disc drive unit.
F571
Recording photos failed.
Replace the disc drive unit.
F572
Recording videos failed due to
magnetic substance in the vicinity of
optical pickup.
Remove the magnetic substance, taking care that the
optical pickup is not damaged.
F573
F700
Disc drive unit (DRG circuit board)
was faulty.
Replace the disc drive unit.
FB00
Optical pickup was faulty.
FE80
Process of writing data to disc failed.
Refer to “4-3-4 Disc load check fl owchart”
