Hitachi DZ-BX35E Service Manual Download Page 53

Page: 53 / 180

4 - 20

Troubleshooting > Checking Versions of Firmware and Updating

Fig. 4-4-2 Example of Display on Updating Firmware

Updating Start Screen

System Update Screen

Drive (Main) Update Screen

Updating Completed Screen

Same Version Screen

Start Firmware update.

Do not turn off power.

Updating system.

Updating drive (Main)
Please wait about 1 minutes.

Do not turn off power.

Firmware updated.

Same revision.
Cannot update.

Screen f

Verifying the Version

Model :

DZ-xxxxxx

System :

x.xxP

Loader :

x.xxP

Camera

: x.xxP (xx)

Drive (Main) : xxxx.xx.xx.REV
Drive (Core) : xxxx.xx.xx.REV

Turn off power

Loader Update Screen

Updating Loader.

Camera Update Screen

Updating camera.

Firmware Update

Do not turn off power.

Firmware Update

Updating drive (Core)
Please wait about 1 minutes.

Do not turn off power.

Firmware Update

Drive (Core) Update Screen

Firmware Update

Unmatched Screen

This disc is not an update
disc for this camera.

Firmware Update

6) When all required updating is complete, the screen for verifying the version of updated ﬁ rmware

will appear and the updated ﬁrmware will be displayed in red.

Make sure that the ﬁ rmware has been updated to agree with the details speciﬁ ed by the technical

bulletin, etc.

7) To complete updating, set the power switch to “OFF” and then remove the disc/card for updating.

Summary of Contents for DZ-BX35E





















































































































































































Search results

Summary of Contents for DZ-BX35E

Reviews:

Related manuals for DZ-BX35E

Brands by name

Popular brands

Hitachi DZ-BX35E, Service Manual

Search results

Summary of Contents for DZ-BX35E

Reviews:

Related manuals for DZ-BX35E

Brands by name

Popular brands