Hitachi DS 10DFL Technical Data And Service Manual Download Page 3

Page: 3 / 27

CONTENTS

Page

SELLING POINTS -------------------------------------------------------------------------------------------------------------- 1

SPECIFICATIONS -------------------------------------------------------------------------------------------------------------- 4

1. Specifications------------------------------------------------------------------------------------------------------ 4

COMPARISON WITH SIMILAR PRODUCTS---------------------------------------------------------------------------- 5

1. Comparison of Specifications

--------------------------------------------------------------------------------------------------------

2. Comparison of Drilling and Fastening Performance Per Charge

-----------------------------------------------

PRECAUTIONS IN SALES PROMOTION-------------------------------------------------------------------------------- 7

1. Safety Instructions

-------------------------------------------------------------------------------------------------------------------------

2. Inherent Drawbacks of Cordless Driver Drills Requiring Particular Attention

During Sales Promotion

-----------------------------------------------------------------------------------------------------------------

REPAIR GUIDE---------------------------------------------------------------------------------------------------------------- 10

1. Precautions on Disassembly and Reassembly

-------------------------------------------------------------------------

2. Precautions on Disassembly and Reassembly of Battery Charger

-----------------------------------------

STANDARD REPAIR TIME (UNIT) SCHEDULES-------------------------------------------------------------------- 20

Assembly Diagram for DS 10DFL

Summary of Contents for DS 10DFL




























Search results

Summary of Contents for DS 10DFL

Reviews:

Related manuals for DS 10DFL

Brands by name

Popular brands

Hitachi DS 10DFL, Technical Data And Service Manual

Search results

Summary of Contents for DS 10DFL

Reviews:

Related manuals for DS 10DFL

Brands by name

Popular brands