-17-
x
Reassembling of the housing (1)
6. Reassembling of the housing
(1) Attach the LED to Housing (A). (B)Set
[29]
. When attaching the LED, be careful to prevent not to twist
the LED wire (delivered as an accessory for DC-Speed Control Switch
[35]
). Also be sure to run the LED
wire through the fixing rib on the housing. (See the figure below.)
(2) Motor DC12V
[28]
and Gear Box Ass’y
[3]
(already coupled) and Shift Knob
[33]
in Housing (A). (B)Set
[29]
.
When mounting these parts, the convex features of Gear Case
[9]
and Motor Spacer
[27]
must be fitted
into the corresponding concave features of Housing (A). (B)Set
[29]
; the convex feature of Clutch Dial
[4]
must be fitted into the corresponding concave feature of Housing (A). (B)Set
[29]
. Also, the two Needles
[16]
projecting from Gear Case
[9]
must be fitted into the two holes on Housing (A). (B)Set
[29]
. Be careful to
prevent the LED wire from being caught between the housing and mounted parts. (See the figure below.)
Housing (A). (B)Set
[29]
(A)
Part to mount
Motor Spacer
[27]
Parts to mount
Needles
[16]
LED
LED mounting space
Parts to mount
Gear Case
[9]
Rib to fix the LED wire
Part to mount Clutch Dial
[4]
