--- 20 ---
(3) Removal of Gear Cover (D)
[20]
(Figs. 3 to 5)
Pull the Change Shaft
[53]
from Inner Cover (D)
[52]
. At this time, be careful not to lose the O-rings (1AP-10)
[13]
at both sides of the Change Shaft
[53]
.
Secure the Armature
[57]
and loosen the Nut M8
[14]
about two turns previously. Remove four Machine
Screws (W/Washers) M5 x 60 (Black)
[66]
and pull out Gear Cover (D)
[20]
from the main body. Remove the
Nut M8
[14]
and pull out Second Shaft (E)
[49]
assembly. Then Second Shaft (D)
[47]
assembly, Counter
Weight (D)
[29]
, Weight Shaft (D)
[30]
, Rubber Spacer
[28]
and Sub Shaft (D)
[40]
can be removed from Gear
Cover (D)
[20]
. At this time, be careful not to lose the Rubber Spacer
[28]
.
Fig. 3
Secure Gear Cover (D)
[20]
. Remove the two Bolts M10
[16]
and pull out Guide Sleeve (C) Ass'y
[25]
from
Gear Cover (D)
[20]
. Then Plunger (C)
[27]
and Guide Sleeve (C) Ass'y
[25]
can be removed together.
Remove the Swing Roller
[37]
and the Pin D6
[38]
. Remove the two Seal Lock Screws M4 x 10
[42]
from
Gear Cover (D)
[20]
. Remove Bearing Cover (B)
[41]
and the Ball Bearing 6003DDCMPS2S
[39]
.
Fig. 4
[52]
[54]
[53]
[13]
[13]
[62]
[20]
[28]
[29]
[30]
[66]
[14]
[15]
[49]
[40]
[47]
