--- 29 ---
10-3. Tightening Torques
Tapping Screws D4 x 8 (Black)
[3]
.............................................. 1.8 0.4 N
•
m (18 4 kgf
•
cm)
Seal Lock Screw M4 x 10
[42]
.................................................... 1.8 0.4 N
•
m (18 4 kgf
•
cm)
Seal Lock Screw (W/Washers) M4 x 10 (Black)
[11]
.................. 1.8 0.4 N
•
m (18 4 kgf
•
cm)
Slotted Hd. Screw (Seal Lock) M4 x 10
[55]
............................... 1.8 0.4 N
•
m (18 4 kgf
•
cm)
Tapping Screws (W/Flange) D4 x 25 (Black)
[5]
......................... 2.0 0.5 N
•
m (20 5 kgf
•
cm)
Tapping Screws (W/Flange) D4 x 30 (Black)
[73]
....................... 2.0 0.5 N
•
m (20 5 kgf
•
cm)
Machine Screws (W/Washers) M5 x 60 (Black)
[66]
.................. 2.6 0.5 N
•
m (25 5 kgf
•
cm)
Hex. Hd. Tapping Screw D5 x 55
[59]
......................................... 3.4 0.7 N
•
m (35 7 kgf
•
cm)
Lock Nut M5
[26]
......................................................................... 3.4 0.7 N
•
m (35 7 kgf
•
cm)
Special Bolt M5
[34]
.................................................................... 5.9 1.5 N
•
m (60 15 kgf
•
cm)
Bolt M10
[16]
............................................................................... 12.8 2.6 N
•
m (125 25 kgf
•
cm)
Nut M8
[14]
................................................................................. 22.1 4.9 N
•
m (225 50 kgf
•
cm)
10-4. Wiring Diagram
Carefully ensure that wiring is accomplished as illustrated below. As incorrect wiring will result in rotation failure,
reverse rotation or other malfunctions, close attention is absolutely necessary.
Fig. 23
Switch body
Noise suppressor
Dial resistor
Triac ass'y
20 min.
Fig. 24
For stator ass'y or for stator
ass'y and noise suppressor
For cord
For cord
For stator ass'y
For triac ass'y or for triac
ass'y and noise suppressor
