--- 23 ---
[5]
[73]
(8) Removal of Inner Cover (D)
[52]
and Armature
[57]
(Fig. 10)
Push the pinion end surface of the Armature
[57]
with a press supporting the end surface of Inner Cover (D)
[52]
to remove the Armature
[57]
. Remove the two Slotted Hd. Screws (Seal Lock) M4 x 10
[55]
and the Ball
Bearing 6001VVCMPS2L
[56]
. Remove the Ball Bearing 608VVC2PS2L
[51]
from the Armature
[57]
.
(9) Removal of Handle (E).(F) Set
[67]
and Switch Ass'y
[75]
(Figs. 11 and 12)
Remove the four Tapping Screws (W/Flange) D4 x 25 (Black)
[5]
and the two Tapping Screws (W/Flange)
D4 x 30 (Black)
[73]
. Then the Switch Trigger
[68]
can be removed. Note that there are two kinds of tapping
screws (w/flange).
Loosen the machine screws securing two internal wires coming from the Stator Ass'y
[60]
and two internal
wires coming from the Cord
[80]
. Then the Switch Ass'y
[75]
can be removed. Remove two Tapping Screws
(W/Flange) D4 x 16
[76]
to remove the Cord Clip
[77]
, Cord
[80]
and Cord Armor D8.8
[79]
from Handle
(E).(F) Set
[67]
.
Fig. 11
Fig. 10
[55]
[52]
[56]
[51]
[57]