21
English
3.
Maintenance
of
the
motor
The motor unit winding is the very “heart” of the power
tool.
Exercise due care to ensure the winding does not
become damaged and/or wet with oil or water.
4.
Gear
case
lubrication
○
Maintenance interval
The gear case should be checked for lubrication after
each 50 hours of use.
○
Lubrication
Remove the cutting head. Clean any dirt and debris
from the area between the gear case. Remove the M6
bolt from the side of the gear case. While rotating the
attaching shaft, inject lithium-base bearing lube (P/N
682975) through the hole until the gear case is full.
Reinstall M6 bolt.
5.
Inspecting
the
carbon
brushes
(Fig.
27)
The motor employs carbon brushes which are
consumable parts. Since and excessively worn carbon
brush can result in motor trouble, replace the carbon
brush with new ones when it becomes worn to or
near the “wear limit”. In addition, always keep carbon
brushes clean and ensure that they slide freely within
the brush holders.
NOTE
When replacing the carbon brush with a new one,
be sure to use the Hitachi Carbon Brush Code No.
999054.
6.
Replacing
carbon
brushes
Take out the carbon brush by
fi
rst removing the brush
cap and then hooking the protrusion of the carbon
brush with a slotted head screw driver, etc., as shown
in
Fig.
28
.
When installing the carbon brush, choose the direction
so that the nail of the carbon brush (see
Fig.
29
) agrees
with the contact portion outside the brush tube. Then
push it in with a
fi
nger as illustrated in
Fig.
30
. Lastly,
install the brush cap.
CAUTION
○
Be absolutely sure to insert the nail of the carbon brush
into the contact portion outside the brush tube. (You
can insert whichever one of the two nails provided.)
○
Caution must be exercised since any error in this
operation can result in the deformed nail of the carbon
brush and may cause motor trouble at an early stage.
7.
Cleaning
of
the
outside
When the grass trimmer is stained, wipe with a soft dry
cloth or a cloth moistened with soapy water. Do not use
chloric solvents, gasoline or paint thinner, as they melt
plastics.
8.
Storage
Store grass trimmer in a place in which the temperature
is less than 40°C and out of reach of children.
9.
Service
parts
list
CAUTION
Repair,
modi
fi
cation and inspection of Hitachi Power
Tools must be carried out by a Hitachi Authorized
Service Center.
This Parts List will be helpful if presented with the
tool to the Hitachi Authorized Service Center when
requesting repair or other maintenance. In the
operation and maintenance of power tools, the safety
regulations and standards prescribed in each country
must be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being improved
and modi
fi
ed to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without prior
notice.
Important
notice
on
the
batteries
for
the
Hitachi
cordless
power
tools
Please always use one of our designated genuine
batteries. We cannot guarantee the safety and
performance of our cordless power tool when used
with batteries other than these designated by us, or
when the battery is disassembled and modi
fi
ed (such
as disassembly and replacement of cells or other
internal parts).
000Book̲CG18DL̲EE.indb 21
000Book̲CG18DL̲EE.indb 21
2009/10/29 20:50:29
2009/10/29 20:50:29
