--- 25 ---
1. Remove the two Tapping Screws (W/Flange) D4 x 25 (Black)
[133]
and the four Tapping Screws (W/Flange)
D4 x 20 (Black)
[140]
, then remove Switch Handle (A)
[134]
. Remove the wire of the Laser Module
[11]
from
the Switching Power Supply
[142]
. (Only the Model C 10FCH)
2. Remove the Machine Screw (W/Washers) M4 x 16
[106]
, Machine Screw M4 x 8
[104]
and the Gear Case
Cover
[105]
.
3. Remove the Machine Screw (W/Washers) M4 x 12 (Black)
[101]
and the Nylon Clip
[100]
.
4. Remove the two Machine Screws (W/Washers) M5 x 16
[36]
and remove the Dust Guide Ass'y
[35]
from the
Hinge
[30]
.
5. Remove the two Hex. Socket Hd. Bolts M6 x 25
[34]
and remove the Laser Holder Ass'y
[17]
from the Hinge
[30]
.
6. Remove the Split Pin D2 x 12
[7]
using a pair of long-nose pliers. Loosen the Special Bolt M5
[8]
and remove
the Laser Base Ass'y
[15]
and Spring (C)
[5]
.
Fig. 33
E. Laser marker
Tools required:
• Phillips screwdriver
• Hex. bar wrench 4 mm
• Hex. bar wrench 3 mm
• Long-nose pliers
