--- 20 ---
1. Remove the four Bolts M8 x 35
[60]
, Spring Washers M8
[61]
and Bolt Washers M8
[62]
, then remove Fence
(A)
[75]
and Fence (B)
[64]
.
2. Loosen the Clamp Lever
[24]
and remove the Machine Screw (W/Washers) M6 x 10
[23]
. Turn the Bolt (Left
Hand) M10
[25]
and remove it from the Hinge
[30]
.
3. Remove Shaft (D)
[27]
and remove the Hinge
[30]
from the Turn Table
[50]
.
4. Remove Table Insert (A)
[40]
and Table Insert (B)
[39]
from the Turn Table
[50]
by removing each fixing screw.
Remove the Side Handle
[51]
to remove the Spring Plate
[69]
from the Turn Table
[50]
.
5. Remove the Nylon Nut M8
[46]
and remove the Turn Table
[50]
from the Base Ass'y
[78]
.
