Hitachi C 10FCE Technical Data And Service Manual Download Page 37

Page: 37 / 62

--- 33 ---

Hex. bar
wrench
(2.5 mm)

(2) Adjustment of squareness with the fence surface

The laser line inclines to the left by turning the Hex.

Socket Set Screw M5 x 6

[6]

clockwise and inclines

to the right by turning counterclockwise.

The squareness of the laser line with the fence

surface can be adjusted in this manner.

Gear Case
Ass'y

[130]

Gear Case
Cover

[105]

Hex. Socket Set
Screw M5 x 6

[6]

Fig. 42

Fig. 43

Laser line

Fence (A)

[75]

Fence (B)

[64]

(3) Adjustment of squareness with the base surface

The laser line inclines to the right by turning the minus

groove clockwise and inclines to the left by turning

counterclockwise. The squareness of the laser line

with the base surface can be adjusted in this manner.

Minus groove

Gear Case
Ass'y

[130]

Gear Case
Cover

[105]

Laser Holder (A)

[2]

Fig. 44

Laser line

Fence (B)

[64]

Laser Base Ass'y

[15]

Fig. 45

Turn Table

[50]

Fence (A)

[75]

Summary of Contents for C 10FCE































































Search results

Summary of Contents for C 10FCE

Reviews:

Related manuals for C 10FCE

Brands by name

Popular brands

Hitachi C 10FCE, Technical Data And Service Manual

Search results

Summary of Contents for C 10FCE

Reviews:

Related manuals for C 10FCE

Brands by name

Popular brands