--- 41 ---
a Improper wiring
b Switch (A) failure
c Switching power
supply failure
d Laser module ass'y
failure
a Switching power
supply failure
b Laser module ass'y
failure
a Iink line is not right
angle.
b Laser marker accuracy
is not adjusted
properly.
c Product accuracy is
not good.
a Laser marker is
horizontally deviated
from the saw blade.
b Laser marker accuracy
is not adjusted
properly.
6
Laser marker does not
light.
(Only Model C 10FCH)
------
------
------
------
------
------
------
0.2/100
(Figs. 54 and 55)
------
------
• Check the wiring.
• Check Switch (A)
[145]
for
conductivity.
• Replace Switch (A)
[145]
.
• Check the Switching Power
Supply
[142]
for conductivity,
input and output referring to
"11-4. Wiring Diagram".
• Replace the Switching Power
Supply
[142]
.
• Replace the Laser Module
Ass'y
[11]
.
• Same as item 8-(c).
• Same as item 8-(d).
• Make a correct ink line again.
• Readjust the accuracy of the
laser marker. (Refer to "11-9.
Adjustment of Laser Marker
Accuracy".)
• Readjust the accuracy of the
product and the laser marker.
• Adjust the position of the laser
line. (Refer to "8-1. Position
Adjustement of Laser Line".)
• Same as item 10-(b).
Item
Phenomenon
Cause
Factory
standard
Inspection, repair or
adjustment
8
Laser line does not
match the ink line.
(Only Model C 10FCH)
9
Laser line does not
match the cutting
position.
(Only Model C 10FCH)
7
Laser light is poor or
strong.
(Only Model C 10FCH)
Laser beam
Laser emitting
aperture
Squareness
0.2/100
Fig. 54
Laser beam
Laser emitting
aperture
Squareness
0.2/100
Fig. 55
Squareness
0.2/100
Fence (B)
Fence (A)
