14
EN
3.2.1 Wiring Procedures
(1) Ensure that the power line and the power on devices connected are all turned off before
performing any wiring work.
(2) Unscrew the bottom screws.
(3) Press two snap-joints at the lower end of the upper cover, remove the cover.
Screw
Open the top cover
in the direction
of the arrow
Remove the screw
in the direction
of the arrow
Figure 3.8 Remove the Upper Cover
(4) Remove the screws on the power board cover with a screwdriver, then remove the power
board cover.
Remove screw
Remove screw
Figure 3.9 Remove the Cover of Power Board
Summary of Contents for airCloud HC-IOTGW
Page 34: ... airCloud Gateway 空調機管理系統 安裝 維護手冊 型號 HC IOTGW ...
Page 62: ...CN MEMO ...