Hitachi 510VE, User Manual

Page: 10 / 91

S-7
Notice
●
Incorrect connection might cause malfunction. Connect the frame ground (FG) terminal to the FG
terminal of the power supply module. For details about wiring, see 7.4 Ground wiring in the S10VE
User's Manual General Description (manual number SEE-1-001). The two shield ground (SHD)
terminals and the FG terminal are commonly connected internally.
(See page 3-4.)
●
To install or uninstall J.NET SYSTEM/S10VE, use the administrator account. Using the standard
account might result in incorrect installation or uninstallation.
●
Before installing J.NET SYSTEM/S10VE, terminate all Windows® programs, including resident
programs in the memory (such as virus monitoring software). Installing J.NET SYSTEM/S10VE while
any of these programs are running might cause an error. If an error occurs, uninstall the tool being
installed, terminate all Windows® programs, and then reinstall the tool. For details about the
uninstallation procedure, see 4.1.3 Uninstallation .
●
Do not specify, as the J.NET SYSTEM/S10VE installation folder, any of the following folders
protected by User Account Control:
- Program file folder (for example,
C:¥Program Files
)
- System root folder (for example,
C:¥Windows
)
- System drive root folder (for example,
C:¥
)
- Program data folder (for example,
C:¥ProgramData
)
(See page 4-2.)
●
J.NET SYSTEM/S10VE cannot be installed on a per-user basis. To install J.NET SYSTEM/S10VE
successfully, you must first log on to the system with an administrator account.
J.NET SYSTEM/S10VE might not be installed properly in any of the following cases: 1) Administrator
permissions are acquired by using User Account Control
#
from a standard user account, 2) The
administrator account was created from a standard user account by using User Account Control.
In this case, log on with the administrator account that was first created on your computer, and then
reinstall J.NET SYSTEM/S10VE.
If you log on with a user account other than that used for installing J.NET SYSTEM/S10VE, the
installed program might not appear in the program menu. In this case, log off and log on again with the
administrator account that was first created on your computer, uninstall the installed program, and then
install the program again.
When you want to create a new account, log on with an administrator account without using User
Account Control.
#: User Account Control is a Microsoft Windows feature that temporarily grants administrative rights to
standard user accounts.
(See page 4-5.)