Hitachi 510VE, User Manual

Page: 70 / 91

4. Operation
4-35
4.2.10 Station error
Function: Displays station error information for the module.
Operation: The following describes the operation procedure.
(1) In the Error information window (Figure 4-28), click the Station error button. The Station error
window (Figure 4-30) appears.
For details about the NET1 error codes (NET1 EC) and NET2 error codes (NET2 EC), see 13.2.2.2
J.NET module troubleshooting in the S10VE User's Manual General Description (manual number SEE-
1-001).
Figure 4-30 Station error window
(2) To start monitoring, click the Start monitoring button. After monitoring starts, the Start monitoring
button changes to the Stop monitoring button.
(3) To stop monitoring, click the Stop monitoring button. After monitoring stops, the Stop monitoring
button changes to the Start monitoring button.
(4) To close the Station error window, click the Close button.
Notice
●
Station error information remains even after normal communication is restored. The error information is
cleared after the PCs are reset or after a power-on reset is performed.