OPERATOR'S STATION
1-21
Display
Contents of Alarms
Remedy
Fuel Temperature Alarm
Fuel temperature has abnormally increased. Stop operation. Check
fuel cooler for any malfunction such as clogging.
Hydraulic Oil Filter Restriction
Alarm
The hydraulic oil filter is clogged.
Replace hydraulic oil filter element.
Air Cleaner Restriction Alarm
Air filter elements are clogged.
Clean or replace air filter elements.
Fuel Filter Restriction Alarm*
Fuel filter is clogged.
Replace fuel filter element.
System Failure Alarm
Communication system is abnormal.
Contact your nearest authorized dealer.
Pilot Control Shut-Off Lever
Alarm
Pilot control shut-off lever system is abnormal.
Contact your nearest authorized dealer.
Electric Lever Alarm
Electric lever system is abnormal.
Contact your nearest authorized dealer.
f
NOTE: The hydraulic oil filter alarm lights only when the high performance element (optional) is used.
f
NOTE: *If the indicator comes ON immediately after replacing the fuel filter, air mixed in the system during replacement
may be the cause. Be sure to bleed air from the fuel system when replacing the fuel filter. (When air is bled, the indicator will
go OFF.)
Summary of Contents for 090001
