Line rider
© PRS 40 EZ REV A 03/16/06
190201_A
29
9.1.2 LIMITS
The unit has no default limit set for the load.
The limits are set by selecting
SETUP/LIMITS/LINERIDER
Use the up and down arrows to set the desired limit. Press
when complete.
9.1.3 Installation
The linerider installation will depend on the type of boom. Follow the applicable instructions for a
hydraulic or lattice boom.
LINERIDER GENERAL INFORMATION
The linerider is attached to the swing arm mounting bracket as shown in Figure 4. The swing arm
assembly has four joints:
1. Vertical movement at the attachment point to the linerider.
2. Horizontal movement of the swing arm.
3. Vertical movement of the swing arm.
4. Swivels horizontally around the mounting bolt.
The mounting bolt secures the swing arm to the machine.
1
2
4
3
Figure 4. Linerider and Swing Arm.
