manualshive.com logo in svg

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, User Manual

Share
Download
Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual Download Page 75

Protection from unauthorized access

Layer 2 Enhanced with Layer 2 Professional

Release 1.0 10/05

6.2 Setting Telnet/Web access

75

6.2 Setting Telnet/Web access

6.2.1 Description Telnet/Web access

The Telnet server of the Switch allows you to configure the Switch using the 
Command Line Interface (in-band). You can switch off the Telnet server to 
prevent Telnet access to the Switch. 
In the state of delivery, the server is switched on..

After the Telnet server has been switched off, the Switch can no longer be 
accessed via a Telnet connection. 

Note: 

The telnet server may be reactivated via the command line interface 

(out-of-band) or via the 

Security:Telnet/Web Access

 dialog in the 

Web-based Interface.

The Web server of the Switch allows you to configure the Switch using the 
Web-based interface. You can switch off the Web server to prevent Web 
access to the Switch. 
In the state of delivery, the server is switched on.

After the web server has been switched off, the Switch can no longer be 
accessed via a web connection. 

Note: 

The web server may be reactivated via the command line interface.

Summary of Contents for MS30, Power MICE, MACH 4000, OCTOPUS





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands