manualshive.com logo in svg

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, User Manual

Share
Download
Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual Download Page 155

Operation Diagnostics

Layer 2 Enhanced with Layer 2 Professional

Release 1.0 10/05

9.8 Reports

151

9.8 Reports

For diagnosis purposes, the Switch allows you to use the following reports:

D

Log Filei

 

The Log File is an HTML file in which the Switch records all important 
device  internal events.

D

System Information

 

The system information in an HTML file containing all system relevant 
data.

These reports are available for diagnosis purposes. In service situations they 
report necessary information to the technician.    

V

Select the 

Diagnostics:Report

 dialog.

V

Click “Log File” to open the HTML file in a new browser window.

V

Click “System information” to open the HTML file in a new browser 
window.

Summary of Contents for MS30, Power MICE, MACH 4000, OCTOPUS





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands