manualshive.com logo in svg

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, User Manual

Share
Download
Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual Download Page 62

Loading Software Updates

62

4.1 Loading the Software from the ACA

Layer 2 Enhanced with Layer 2 Professional

Release 1.0 10/05

U

Test stored images in USB memory

Select 

4 

to test, if the stored images of the software in ACA 21-USB 

contain valid codes.

U

Apply and store selection

Select 

5

 to apply and store the selection of the software.

U

Cancel selection

Select Sie 

6

 to cancel selection and leave this dialogue without changes.

4.1.2 Starting the software

This menu of the System monitor offers you the possibility to start the selec-
ted software.

4.1.3 Performing a cold start

This menu of the system monitor offers you the possibility to reset the hard-
ware of the Switch and to reboot.

Summary of Contents for MS30, Power MICE, MACH 4000, OCTOPUS





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands