manualshive.com logo in svg

Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, User Manual

Share
Download
Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS User Manual Download Page 100

Synchronizing the System Time of the 

98

7.3 Precison Time Protocol

Layer 2 Enhanced with Layer 2 Professional

Release 1.0 10/05

D

PTP port state

 

master

: Port is in the PTP master mode

 

slave

: Port is in the PTP slave mode.

 

disabled

: PTP function on this port is disabled.

 

passiv

e: Port is in the PTP passive mode.

 

listening

: Port has no information available and is awaiting 

synchronization messages.

D

PTP port burst

 

disable

: During a synchronization interval there is a synchroni-

zation run.

 

enable

: During the synchronization interval, there are 2 to 8 syn-

chronization runs. This permits faster synchronization when the 
network load is high.

 

Fig. 31:

PTP Port dialog

Summary of Contents for MS30, Power MICE, MACH 4000, OCTOPUS





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands