Hirschmann MACH 1000 Reference Manual Download Page 112

Page: 112 / 572

CLI Commands: Base

112

4.6 Management Commands

CLI L2P

Release 7.0 05/2011

4.6.19 show digital-output

This command shows the output value or configuration from all available
digital outputs of the MICE I/O Module.

Format

show digital-output

Mode

Global Config

Digital output System Information:

Admin State

Show the IO-Module digital outputs Admin State.
Possible values: Disabled, Enabled.

Refresh Interval [s]

Show the IO-Module digital outputs Refresh Interval in seconds.
Value range: 1-10.

Retry Count

Show the value of the IO-Module digital outputs Retry count.
Value range: 1-10.

Digital output Information:

Output

Show numbers of the IO-Module digital output.
Possible values (example): 1/1, 1/2, 1/3, 1/4,
3/1, 3/2, 3/3, 3/4

Value

Show the value of the IO-Module digital outputs.
Possible values: Not available, High, Low.

Log-Event

Show if Event logging is enabled or disabled for the IO-Module digital
outputs.
Possible values: Disabled, Enabled.

SNMP-trap

Show if SNMP traps are enabled or disabled for the IO-Module digital
outputs.
Possible values: Disabled, Enabled.

Summary of Contents for MACH 1000





























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MACH 1000

Reviews:

Brands by name

Popular brands

Hirschmann MACH 1000, Reference Manual

Search results

Summary of Contents for MACH 1000

Reviews:

Brands by name

Popular brands