Part n° 890-00487 rev.00
Evolution Bird Scale Controller
37
Scale 1
Calib weight: 10000
Push + for next step
Scale is: Empty
5.7.4 Scale Calibration
The scale must be calibrated regularly. To ensure the accuracy of the scale,
we recommend to check the scale's accuracy between each flock.
Select the "
8. Installation
" menu
from the main menu then press
the right-arrow key. Note that this
menu is only accessible from the
installer mode.
Select the
"4. Scale Calibr."
menu
then press the right-arrow key.
The scale's calibration weight
flashes on the display.
Select the proper scale then press
the right-arrow key. The scale's
calibration weight flashes on the
display.
Set the calibration weight to the
desired value using the adjustment
buttons. Once this is done, press
the down-arrow key.
Make sure the scale is stable and empty then press the down-arrow
key to select the
"Scale is:"
menu. Press the
"+ "
key . The message
"Laden"
is then displayed. Put the calibration weight on the scale and
wait until the scale becomes stable again. It is recommend to use a
precision weight of 10kg ±250mg.
Once the scale is stable again, save the calibration by pressing the
"+ "
key again . The message "
Saved
" is displayed during 2 seconds
then the display shows the message "
Empty
" once again. The scale
calibration is now over.
Scale 1
Calib weight: 10000
Push + for next step
Scale is: Laden
8
. Installation
4. Scale Calibr.
8.4 Scale
calibration
1. Scale 1
2. Scale 2
