ABOUT HIPAC
We are an Australian healthcare company that guarantees to stand
behind all our medical products, both manufactured and imported,
because we’re here for the life of our products and clients.
PO Box 797, 36 Long St. Goulburn NSW 2580, Australia
P. +61 2 4823 0000 E. [email protected]
SYDNEY | MELBOURNE | BRISBANE | ADELAIDE | PERTH
hipac.com.au
ABN 27 600 353 688
5.
Use the hinge fixing holes as guidance to pilot drill holes using a 3.5mm drill.
6.
Screw the EM hinge section to the door.
7.
Then fit the full length hinge section referring to the HFM/HAL fitting instruc-
tions ensure the bottom of the EM hinge and the top of the full length hinge
are butted together leaving no more than a 0.5mm gap.
8.
Push the EM hinge section up to within 0.5mm of the top of the frame.
9.
Mark then pilot the fixing holes for the screws for both hinge sections.
10.
Fix the door to the frame with the main section of the hinge, leaving the EM
section detached from the frame.
11.
Connect the control cable from the frame to the other side of the hinge.
12.
Open the hinge against the frame, ensuring the cable is not trapped then fix
the EM hinge to the frame.
13.
Once all hinge sections are fitted, fit the domed cap on top of the hinge
knuckle, following domed cap fitting instructions.
14.
Once installed, Hipac should be contacted to carry out the commissioning to
validate the warranty.
Summary of Contents for 120120
Page 6: ......
