5.
Preparing the door
Hipac Healthcare Pty Ltd can take no responsibility for incorrect operation of Door Top Alarms
that are not fitted as per directed in these instructions.
If retrofitting, then removal of the door is recommended.
Remove
12mm
from the
top of the door
Bore down
69mm
from above at
29mm
from the hinged end.
Meet this bore with another from the hinged
side.
This is a channel for routing the cables.
Make channel down centerline on
the top of the door:
• 26x26mm
(Not Fire Rated)
• 28x28mm
(FD30)
Feed cable and place DTA.
Screw in with fixings provided.
Wire Door top alarm and test.
Recess 3mm:
• HINGED END:
From bottom of
channel 18mm and 25mm wide
• FREE END:
From bottom of
channel 18mm and full width
Summary of Contents for 120120
Page 6: ......
