15. HFM Electrical Transfer Hinge
Fitting Instructions
Fixings
(2x) M3 x 6mm (AUS 12mm), Countersunk, Security Torx screws in A2 Stainless steel.
(5x) No.8 x 1 1/2”, Countersunk, Security Torx wood screws in A2 Stainless steel.
Domed Cap (Optional extra).
Note:
If the hinge is to be rebated, attach the EM hinge to the DTA using the M3 x 6mm
screws. Trace the profile and rebate before assembly.
Instructions
1.
Fit the Door top alarm to the door.
2.
Connect the DTA plug and the hinge plug on the side of the hinge which has been
profiled with extra holes. Ensure the plug is connected in the correct orientation
with the clip, passing over the latching arm.
3.
Place the electrical transfer hinge against the door edge.
4.
Screw the two M3 x 6mm fixings into the DTA first to position the hinge correctly.
The DTA should follow the profile of the hinge. Ensure that the cable from the EM
hinge isn’t trapped between the door and the hinge. The cabling should sit within
the recess in the door.
Summary of Contents for 120120
Page 6: ......
