Hioki SW1001, Instruction Manual

Page: 93 / 164

89
Message List
Message
[ ]: Omissible
Data
[ ]: Omissible,
( ): Response data
Description Reference
:IO:FILTer:STATe
<1/0/ON/OFF>
Sets the EXT. I/O input terminal filter
function.
p. 102
:IO:FILTer:STATe?
(<1/0>)
Queries the EXT. I/O input terminal
filter function.
:IO:FILTer:TIME
<Filter time 0.05 to 0.50/
MIN/MAX/DEF> Sets the EXT. I/O input terminal filter
time.
p. 102
:IO:FILTer:TIME?
(<Time>)
Queries the EXT. I/O input terminal
filter time.
:IO:PULSe:TIME
<Pulse time 0.001 to
0.100/MIN/MAX/DEF>
Sets the CLOSE signal pulse width.
p. 102
:IO:PULSe:TIME?
(<Time>)
Queries the CLOSE signal pulse
width.
:SYSTem:COMMunicate:LAN:CONTrol
<Port No. 1 to 65535>
Sets the communication command
port No.
p. 103
:SYSTem:COMMunicate:LAN:CONTrol?
(<Port No.>)
Queries the communication command
port No.
:SYSTem:COMMunicate:LAN:GATeway
<Gateway IP address 0
- 255,0 - 255,0 - 255,0 -
255>
Sets the default gateway.
p. 103
:SYSTem:COMMunicate:LAN:GATeway?
(<Gateway address>) Queries the default gateway.
:SYSTem:COMMunicate:LAN:IPADdress
<IP address 0 - 255,0 -
255,0 - 255,0 - 255>
Sets the IP address.
p. 104
:SYSTem:COMMunicate:LAN:IPADdress?
(<IP address>) Queries the IP address.
:SYSTem:COMMunicate:LAN:SMASk
<Subnet mask 0 - 255,0 -
255,0 - 255,0 - 255>
Sets the subnet mask.
p. 104
:SYSTem:COMMunicate:LAN:SMASk?
(<Subnet mask>) Queries the subnet mask.
:SYSTem:COMMunicate:LAN:MAC?
(<MAC address>) Queries the MAC address. p. 105
:SYSTem:COMMunicate:LAN:UPDate
Apply the LAN settings.
p. 105
:SYSTem:COMMunicate:RS232C:SPEED
<9600/19200/38400>
Sets the RS-232C communication
speed.
p. 103
:SYSTem:COMMunicate:RS232C:SPEED?
(<9600/19200/38400>)
Queries the RS-232C communication
speed.
:SYSTem:COMMunicate:FORWard:RS232C:SP
EED
<9600/19200/38400>
Sets the RS-232C communication
speed of the communication
command forwarding function.
p. 101
:SYSTem:COMMunicate:FORWard:RS232C:SP
EED?
(<9600/19200/38400>)
Queries the RS-232C communication
speed of the communication
command forwarding function.
:SYSTem:COMMunicate:FORWard:TIMeout
<Timeout time 1 to 100> Sets the query forward timeout.
p. 101
:SYSTem:COMMunicate:FORWard:TIMeout?
(<Timeout time 1 to 100>) Queries the query forward timeout.
:A
<Command character
string to be forwarded> Transfers the command or query to
forward destination A.
p. 101
:TEST:RELayshort
<Slot No.>,<CH/BUS/
OPEN>
Relay contact welding test
p. 106
8
Communication Function