Hioki SW1001, Instruction Manual, Page: 154 / 164

150
Rack Mount
Attachment procedure (Example: SW1001)
All screws are M3 × 6 mm.
1
Remove the four screws shown
in the figure and remove the
rubber feet from the bottom.
2
Remove the screws on the left
and right sides shown in the
figure (two screws each toward
the front).
Rack mount bracket (EIA, JIS)
3
Attach the rack mount bracket.
Use M3 × 8 screws on the left and right
side at the front of the device.
When mounting the device on a rack, use a commercially available base for reinforcement.