Hioki LR8512 Instruction Manual Download

Page: 55 / 185

Using the LR8410 as a Unit

There are two ways.

Real-time measurement using the LR8410

LR8410

(Line-of-sight 30 m)

Real-time measurement using a Windows

LAN/USB

communications

Windows

(Logger Utility)

LR8410

(Line-of-sight 30 m)

3.1 Real-time Measurement Using the LR8410

Turn ON the power of the instrument and the LR8410.

Register the instrument as a unit using the LR8410 Quick Set function (Unit

Guide).

Set the measurement conditions using the Quick Set function (Config

Guide) and send the conditions to the instrument.

Start measurement.

For details, refer to the LR8410 measurement guide.

3 Using the LR8410 as a Unit

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for LR8512


























































































































































































Search results

Summary of Contents for LR8512

Reviews:

Related manuals for LR8512

Brands by name

Popular brands

Hioki LR8512, Instruction Manual

Search results

Summary of Contents for LR8512

Reviews:

Related manuals for LR8512

Brands by name

Popular brands