19
Usage Notes
CAUTION
•
Do not excessively tighten the screw of the output terminal for the 9695-
02 Clamp On Sensor. The appropriate torque is 0.5 N•m.
• Do not input current exceeding the specified measurement range. Doing
so may damage the instrument.
•
Avoid stepping on or pinching the cords to prevent damage to them. Do
not bend or pull the cord bases.
•
Do not drop or hit the clamp sensor. Doing so can damage the core butt
joint and negatively affect measurement.
•
Do not tuck foreign material into the joint of the clamp core tip and
instrument or insert an object into the gap of the core. Doing so may
deteriorate the sensor characteristics or cause an open/close operation
failure.
•
To avoid damaging the instrument, do not connect any equipment other
than the clamp sensor to the BNC terminal.
•
To avoid damaging the instrument, do not short the connector or input
voltage.
•
When dust is attached to the clamp core tip butt joint, gently wipe it with a soft
cloth to prevent adverse effects on measurement.
•
When connecting a cable to the output terminal of the 9695-02 Clamp On
Sensor, bring the cable as close to the terminal as possible to avoid the influence
of an external magnetic field.
•
When connecting the 9695-02 Clamp On Sensor to the instrument, use the 9219
Connection Cable. (The 9219 connection is “Crimped terminal-BNC”.)
www.
GlobalTestSupply
.com
Find Quality Products Online at:
