PEM200 User Manual
28
Step Increment:
Step increment describes the step size of a wavelength sweep.
Entering a different step increment can be accomplished two ways:
1. Double click the step increment displayed to highlight the setting and then enter a
new step increment using the keyboard.
2. Click on the up
▲
or down
▼
arrow to the right of the step increment display to adjust
the step increment setting by single digits.
Number of Steps:
The number of steps taken in the wavelength sweep. Entering a
different number of steps can be accomplished two ways:
1. Double click the number of steps displayed to highlight the setting and then enter a
new number of steps using the keyboard.
2. Click on the up
▲
or down
▼
arrow to the right of the number of steps display to adjust
the number of steps setting by single digits.
Step Delay:
The delay in seconds taken between each step in the wavelength sweep.
Entering a different step delay can be accomplished two ways:
1. Double click the step delay displayed to highlight the setting and then enter a new
step delay using the keyboard.
2. Click on the up
▲
or down
▼
arrow to the right of the step delay display to adjust the
step delay setting by single digits.
Set all parameters and select ‘Start Scan’ to begin wavelength sweep.
Figure 6.5 PEM200 Control and Scan Panel