52
The "Options" dialog allows you to set how the Polaris MINI scans for and detects
wireless networks. The "Scanning Always Available" option allows you to choose
whether Polaris MINI auto scans for available networks, even when you don't
open the Setup Internet dialog. The "Wi-Fi Frequency Band" determines what Wi-
Fi networks are detected and used. Choose from "Auto", "5GHz" and "2.1GHz".
Use "Space" to adjust the options in the dialog, and press "Enter" to save your
settings.
3.2.2 LAN Setup
Before attempting to set up a LAN connection, connect one end of a LAN cable
to the Polaris MINI via a USB to Ethernet adapter, and the other to a router or
direct LAN connection to the Internet. ?. From the list of connection options in "Set
up Internet", navigate to "LAN" and press "Enter".
"Setup IP: Automatic" is displayed. If your service provider does not require you
to use a static IP address, simply press "Enter" on this option for automatic setup.
For the automatic setup, your host server should provide DHCP service (Dynamic
Host Configuration Protocol).
To set up your IP configuration manually, move to "Manual" by pressing "Space-
1", and press "Enter". The following settings are displayed: "IP", "Subnet mask",
"Gateway", and "Primary DNS". These settings require specific numeric
addresses. Please contact your Internet service provider for the correct
addresses. Use computer Braille to type the information for each setting, using
"Space-1" and "Space-4" to move among the settings. When you have entered
