HIMS Inc.
BookSense XT – User Manual
3) Press the RIGHT, OK, or MENU button to select preset. “Add preset, dialog” is
announced.
4) Press the RIGHT, OK, or MENU button to select preset. “Add preset, dialog, select
preset 1, (frequency), combo box” is announced. If there are no added channels for
channel number 1, then ‘select preset 1, empty, combo box” is announced.
5) Press the LEFT or RIGHT button to move to the channel number that you want to use for
the frequency. Every time you move to a channel, BookSense announces the channel
number and frequency. If there is an empty channel, you will hear the channel number
and say “empty.”
6) Move to the desired channel number and press the OK or MENU button. “Preset # has
been added” is announced.
If you set a preset to a new frequency on an existing preset, “Preset # is already used” is
announced. And you need to enter the different number.
7.12.3.2 Deleting a Preset
To delete a preset, please follow these steps:
1) Press the MENU button.
2) Press the DOWN button two times to move to “Presets, pull down”.
3) Press the RIGHT, OK, or MENU button. “Add preset, dialog” is announced.
4) Press the DOWN button to move to “Delete preset, dialog”. Press the RIGHT, OK, or
MENU button. “Delete preset, dialog, delete preset 1, (frequency), combo box” is
announced. If nothing has been added to preset number 1, then “Delete preset 1, empty,
combo box” is announced.
5) Press the LEFT or RIGHT button to move to the preset that you want to delete.
6) Press the OK button or the MENU button on the preset that you want to delete. “Preset #
has been deleted” is announced and the BookSense XT will delete the old preset and
return to the radio.
7.12.4 Adjusting the Frequency scanning Sensitivity
You can adjust the sensitivity of the scan using MENU button as well as number 7 button
(Refer to Chapter 7.6).
1) Press the MENU button.
2) Press the DOWN button repeatedly until you hear a message ‘set Frequency scanning
Sensitivity, dialog”.
3) Press the RIGHT, OK, or MENU button. Then BookSense says “Channel scanning
sensitivity setting dialog, Current scanning sensitivity 4, Combo box”, and you can
65
