HIMS Inc.
BookSense XT – User Manual
and you cannot cancel out of an edit box until you delete all numbers.
If you enter the number already existed and pressing the OK button, then “Highlight mark ##
already exists. Move? Yes” is announced. Press the OK or MENU button to set highlight
mark current location. If you want to insert the different number, pressing the LEFT or RIGHT
button to switch to “No” then press the OK or MENU button. It will ask you “Enter the
highlight mark number to insert, edit box” and you need to enter the different number. And
the previous number keeps original location. Note: In this case, if the number is used as
mark or voice memo, then “Mark or voice memo ## already exists, Move? Yes” is
announced.
Note: Mark, voice memo, and highlight mark are used same number so number should not
be duplicated.
6.15.4 Moving to a Mark
If the mark, voice memo, or highlight mark has been inserted while reading a file, you can
move to the location where the mark, voice memo, or highlight mark is located. Perform the
following steps to move to a mark, voice memo, or highlight mark:
1) Press number 2 button while you are reading a file or while it is paused.
2) It will ask you “Enter the mark number to move to, edit box.” And enter the mark number
that you want to move to.
3) Press the OK button then and you will move to the location of the mark and start reading.
Note: In step 2, you can move to the mark regardless type of mark.
Note: Here are 3 different setting modes to move to.
1) Mark: you will move to the location of the mark and start reading.
2) Voice memo: you will move to the location of the voice memo and BookSense says voice
memo that you have recorded. Then it starts reading from the location of voice memo.
3) Highlight mark: you will move to the start point of the highlight mark. It reads the interval
of highlight mark and pause. Every time you press the OK button, it keeps reading the
interval that you have selected. To press the PLAY button, it starts reading the end of the
highlight mark.
Note: If you press the CANCEL button while reading the interval, it will move to the end
of the highlight mark and read.
But if you enter the number that does not exist, “This mark does not exist” is announced and
you is returned to the document. Or beyond the range of 1~1,000, BookSense says “Enter
range from 1 to 1,000, edit box” and you need to enter the number range from 1 to 1,000.
54
