HIMS Inc.
BookSense XT – User Manual
2.14 Set sleep timer
The sleep timer will turn the unit off at a specified time regardless of what you are doing.
Please follow these steps;
1) Press number 4 button for more than 2 seconds.
2) BookSense says “Enter the number of minutes for the sleep timer, XX, edit box” and
enter the number range from 0 to 180.
Note: XX shows the remaining time of sleep timer. If sleep timer is “0”, BookSense says
“off”.
3) Press the OK or MENU button.
To cancel setting the sleep timer, press the CANCEL button in step 2 before entering the
number. Or press the CANCEL button instead of the OK button in step 3; to delete all
numbers you have entered, press the CANCEL button until you have deleted all numbers.
After all numbers have been deleted, you will hear a ding. Then, press the CANCEL again to
close the edit box. Note that the CANCEL button acts as a backspace key and you cannot
cancel out of an edit box until you delete all numbers.
Note: This toggle will not work in the “Radio.” If you enter “0” in step 2, the sleep timer will
not work.
Note: Once the sleep timer is set, even if the device is active, it will shut off. If the device is
not active but still on, the power save mode setting will have first priority. That means if you
set 30 minutes for the sleep timer and set 5 minutes for the power save mode setting, the
device is turned off after 5 minutes.
You can also set the sleep timer from the Global Options, please refer to 9.7 Set Sleep
Timer.
2.15 Bluetooth On/Off
BookSense XT allows you to use a stereo Bluetooth headset. To use Bluetooth function, you
need to turn on the Bluetooth first. It toggles between ON and OFF by pressing number 6
button for more than 2 seconds. But this toggle will not work in the “Radio.” You can also turn
on the Bluetooth from the Global Options, please refer to 9.6 Bluetooth Options.
2.16 Hold Switch
Hold switch allows you to lock the BookSense XT. It is located at the right side of the device.
Pull this switch down if you want to put the device in hold status. If the BookSense XT is on
13
