HIMS Inc.
BookSense XT – User Manual
the edit box. Then later when you add a second mark, it already has 2 in the edit box
.
If you enter the number beyond range, “Enter range from 1 to 1,000, edit box” is announced.
To cancel the insertion of the highlight mark, press the CANCEL button in step 4 before
entering the number. Or press the CANCEL button instead of the OK button in step 5; to
delete all numbers you have entered, press the CANCEL button until you have deleted all
numbers. After all numbers have been deleted, you will hear a ding. Then, press the
CANCEL again to close the edit box. Note that the CANCEL button acts as a backspace key
and you cannot cancel out of an edit box until you delete all numbers.
If you enter the number already existed and pressing the OK button, then “Highlight mark ##
already exists. Move? Yes” is announced. Press the OK or MENU button to set highlight
mark current location. If you want to insert the different number, pressing the LEFT or RIGHT
button to switch to “No” then press the OK or MENU button. It will ask you “Enter the
highlight mark number to insert, edit box” and you need to enter the different number. And
the previous number keeps original location.
Note: In this case, if the number is used as mark or voice memo, then “Mark ## or voice
memo ## already exists, Move? Yes” is announced.
Note: Mark, voice memo, and highlight mark are used same number so number should not
be duplicated.
5.15.4 Moving to a Mark
If the mark, voice memo, or highlight mark has been inserted while reading a file, you can
move to the location where the mark, voice memo, or highlight mark is located. Perform the
following steps to move to a mark, voice memo, or highlight mark:
1) Press number 2 button while the book is playing or paused.
2) “Enter the mark number to move to, edit box” is announced. Enter the number of the
mark that you want to move to.
3) Press the OK button. You will then be taken to the place where the mark is located, and
the book will start playing from that location.
Note: In step 2, you can move to the mark regardless type of mark.
Note: Here are 3 different setting modes to move to.
1) Mark: you will move to the location of the mark and start reading.
2) Voice memo: you will move to the location of the voice memo and BookSense says voice
memo that you have recorded. Then it starts reading from the location of voice memo.
40
