START UP |
PAG. 12
•
Projectors direction:
To give the projectors direction we must first
unblock the lockscrew of the mast (Fig. 2) to turn the handwheel
located on the base of the mast. This orientation allows a 355º mast
rotation and offers a 360º of lighting field.
Fig.2
5.6 STARTING THE ELECTRICAL MOTOR
In order to raise the mast you must connect the main switch at the tower control
panel (panel located in one of the side compartments) This switch feeds the
electrical motor of the Lighting Tower which will allow raising and unfolding the
mast in its all.
5.7 MAST START CONTROL & PROJECTORS ORIENTATION/DIRECTION
•
Mast start control:
lt allows the control of the mast through two
simple maneuver press buttons located at the waterproof and
maneuvering shelter (Fig. 1). Before moving the mast, it is necessary
to start the electrical engine as described previously. Moreover, it is
crucial to anchor and level out the tower with the extensible side legs.
The maneuver press buttons only allows safe movements of the mast.
This means that you will not be allowed to spread out the mast until the
mast is not completely perpendicular to the floor. Therefore you will not be
allowed to pull the mast down until the evrey section is not alerady cleared.
The top button controls the slope angle regarding the horizontal (Oº
transport position, 9Oº working position), and the mast raising from is
vertical startign position up to 8.9 meters.
Fig.1
RAMIRENT
